| 应轻放塑料托盘，避免落地时受力不均 |
| 添加时间：2019/9/21 16:10:10 浏览次数： |
| 1、应轻放塑料托盘，避免落地时受力不均，发生损坏。 1. Plastic pallets should be lightly placed to avoid uneven force and damage when landing. 2、放置货物时，应均匀放置，避免尖锐面直接压在周转箱箱底部，因受力不均而发生侧歪或损坏，更严重时会损坏箱内货物。 2. When placing the goods, they should be evenly placed to avoid the sharp surface directly pressing on the bottom of the revolving box. The side tilt or damage will occur due to uneven force, and the goods in the box will be damaged even more seriously. 3、使用配套托盘时，应考虑周转箱尺寸是否适合此塑料托盘使用，避免尺寸不合适，摆放不当而发生侧歪或倒箱。 3. When using the matching tray, we should consider whether the size of the turnaround box is suitable for the use of the plastic tray, so as to avoid the side tilt or inverted box caused by the improper size and placement. 4、堆垛使用时，应考虑自身周转箱承重，堆垛高度限制最。 4. When stacking, the load-bearing capacity of the turnover box should be considered, and the stacking height should be the most limited. 正确的使用塑料周转箱应该做到单箱货重不超过25KG（正常人体受限），并不可装满箱，应至少留有20mm（除去上层接合处的部份），防止货物直接与箱底接触，使产品受损或脏污。塑料周转箱组合码放在塑料托盘上加上适当的捆扎和裹包，便于利用机械装卸和运输，从而满足装卸、运输和存储的要求 Correct use of plastic swing boxes should not exceed 25KG (normal body is limited), and should not be filled with boxes, should leave at least 20mm (excluding the upper joints) to prevent goods from directly contacting the bottom of the box, so as to damage or dirty products. The combination codes of plastic turnover boxes are placed on plastic pallets and properly bundled and wrapped to facilitate mechanical handling and transportation, thus meeting the requirements of loading, unloading, transportation and storage. |
| 上一页 物流周转箱引入RFID技术 降低运输成本 |
| 下一页 网格卡板箱优势 |
Copyright © 技术支持：遨游网络